Skip to main content
Corvus
FAQ

How does LiDAR work?

LiDAR uses laser pulses to measure distance to surfaces. Combined with the known direction of each pulse, it builds a 3D point cloud of the captured space.

LiDAR, Light Detection and Ranging, is a survey technique that uses laser pulses to measure the geometry of physical spaces, structures, and surfaces. It is widely used for as-built capture, façade survey, and BIM-ready geometry capture in UK construction.

The basic mechanism

A LiDAR scanner contains a laser emitter, a receiver, and a precise positioning system. To measure each point:

  1. The laser emits a short pulse of light in a known direction.
  2. The pulse travels to the nearest surface in that direction and reflects.
  3. The receiver detects the returning pulse.
  4. The system measures the round-trip time.
  5. Distance = (speed of light × time) / 2.
  6. Combined with the known direction, distance becomes a 3D coordinate.

A modern terrestrial LiDAR scanner can measure hundreds of thousands of points per second or more, sweeping through a full sphere from each setup position. Each measurement becomes a point in the resulting cloud.

Scanner types

Different LiDAR platforms suit different applications:

  • Terrestrial (tripod-mounted). The accuracy backbone, millimetre-grade engineering capture.
  • Mobile (handheld, backpack, vehicle-mounted). Faster and more reachable; typically centimetre-grade accuracy with SLAM-based registration.
  • Drone-mounted. Aerial reach, typically centimetre-level with ground control.
  • Static long-range. For very large structures and outdoor scenes.

What it captures

Each LiDAR point carries:

  • 3D position (X, Y, Z).
  • Intensity (how strongly the surface reflected the pulse).
  • Often colour (from an integrated camera).

Together, millions of points make up a measurable, photorealistic record of every surface within line of sight to the scanner.

Registration

Most LiDAR surveys involve multiple scan stations. Registration ties them into a single coherent dataset:

  • Common targets (typically reflective spheres or chequerboards) are placed in overlapping zones.
  • Each station captures the targets along with the surrounding geometry.
  • Software calculates the transformation that aligns each station with the others.
  • The result is a single registered point cloud. Its accuracy depends on the scanner, the ranges and the registration.

Registration accuracy is reported as part of the deliverable.

Where it wins

  • Indoor and shaded environments where photogrammetry struggles.
  • Plain or reflective surfaces that confound photogrammetric processing.
  • Highest-accuracy engineering capture.
  • Structural monitoring with repeat captures.
  • Complex geometry with deep recesses.

Where photogrammetry wins

For large external sites with good light and well-textured surfaces, drone photogrammetry is often more cost-effective. The two methods are complementary; the right surveyor picks by application.

Deliverable formats

Common formats:

  • E57: open, vendor-neutral.
  • RCP / RCS: Autodesk’s format, for Revit and other Autodesk tools.
  • PLY, PTS, LAS: specialist downstream uses.

For more detail, see What is LiDAR scanning in construction and What is a point cloud survey.

For a point cloud you can design against, see our LiDAR scanning service.

Ready to see what's beneath the surface?

Tell us what you're working on. We call back the same working day with a method and a date in the diary.

Call 020 3886 3660 Get a Quote